Описание оборудования | |
---|---|
Electronic cam-operated switch group | |
General specifications | |
Switch-on delay | 10 s |
Data storage | Standard Micro SD flash card |
Programming | by means of internal MS-WindowsTM software (device is detected as an external flash drive). |
Indicators/operating means | |
Status indicator | 8 LEDs , red and yellow |
Electrical specifications | |
Operating voltage | 20 ... 30 V DC (SELV/PELV) |
No-load supply current | ? 90 mA (without sensor) |
Interface | |
Interface type | USB 2.0 for parameterization tool |
Input | |
Input type | RS 232 interface for Ind. angular measuring system |
Switching output | |
Output type | 12 switch outputs PNP, short circuit / overload protected 2 high power outputs PNP, not short-circuit protected |
Operating current | switch outputs: ? 250 mA , total ? 1.5 A high power outputs: ? 1.5 A , total ? 2.2 A |
Short-circuit protection | pulsing |
Analog output | |
Output type | 6 current outputs 4 ... 20 mA (current sinks) |
Load resistor | ? 600 ? at 24 V DC |
Compliance with standards and directives | |
Standard conformity | |
Ambient conditions | |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
Mechanical specifications | |
Connection type | X1, M23 connector X2, M12 x 1 socket X3, M12 x 1 socket X4, M12 x 1 connector |
Housing material | PBT |
Degree of protection | IP65 |
General information | |
Note | Length of cable at X1 and X2: max. 30 m Length of caИли отправьте нам запрос на/td> |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |